A Mohs hardness scale chart ranks minerals from 1 (talc) to 10 (diamond) by which one scratches which. Quartz at 7 is the line to remember: stones softer than 7 scuff more easily in daily wear, so store them apart and clean them gently.
A Mohs hardness scale chart is the quickest way to see how well a crystal resists scratching, and once you know how to read one, it changes how you wear, store and clean every stone you own. The scale ranks minerals from 1 to 10, with soft talc at the bottom and diamond at the top, and every other gem or crystal finds its place somewhere in between. Below you will find the ten reference minerals, a second chart of popular crystals, a simple scratch test you can try at home, and the practical lessons collectors tend to learn the hard way.
What Is the Mohs Hardness Scale?
The scale was devised in 1812 by the German mineralogist Friedrich Mohs, who wanted a simple way to tell minerals apart in the field without a laboratory. His idea was elegant: if one mineral can scratch another, it is the harder of the two. He chose ten fairly common minerals as fixed reference points and put them in order. Any unknown mineral could then be placed by testing which references it scratches and which ones scratch it.
In this context, hardness means scratch resistance and nothing else. It is not the same as strength, weight or how easily a stone breaks when dropped. A crystal can be hard and still chip, and a fairly soft stone can survive a fall that would crack a harder one. Keep that difference in mind, because it comes up again when we talk about jewelry.
The other thing to know is that the scale is ordinal, which means it records order rather than equal steps. Moving from 1 to 2 is a small jump. Moving from 9 to 10 is enormous: diamond is far harder than corundum, the mineral behind ruby and sapphire, even though they sit only one number apart. A Mohs hardness scale chart tells you which stone wins a scratch contest, not by how much it wins.
Half numbers such as 5.5 or 6.5 simply mean a mineral falls between two reference points. Some stones are given a range, such as 6 to 6.5, because individual samples vary or because the crystal is slightly harder in one direction than another.
The Mohs Hardness Scale Chart: 10 Reference Minerals
This is the classic Mohs hardness scale chart, the ten minerals Mohs chose as his yardsticks, with a note on what each one means for a crystal lover. You can read more about each of them in our guide to the minerals on the Mohs hardness scale, and our definition of the Mohs hardness scale covers the idea in plain terms.
| Hardness | Reference mineral | What it means in practice |
|---|---|---|
| 1 | Talc | The softest on the scale. A fingernail marks it easily and it feels almost soapy. |
| 2 | Gypsum | A fingernail can still scratch it. Selenite is a clear, crystalline form of gypsum. |
| 3 | Calcite | A copper coin scratches it. Marble is made largely of calcite. |
| 4 | Fluorite | A steel knife scratches it without much effort. |
| 5 | Apatite | Close to the hardness of a steel knife blade. |
| 6 | Orthoclase feldspar | Scratches ordinary glass. The feldspar family also includes moonstone, labradorite and sunstone. |
| 7 | Quartz | Scratches glass and most steel. Amethyst, citrine and rose quartz are all quartz. |
| 8 | Topaz | Harder than quartz, so everyday grit cannot scratch it. |
| 9 | Corundum | The mineral of ruby and sapphire. |
| 10 | Diamond | The hardest natural mineral, able to scratch everything else on the list. |
If you want to memorize the order, a playful line helps: “Tiny Gnomes Can Find Amethyst Or Quartz, Thankfully Carrying Diamonds.” The first letters follow talc, gypsum, calcite, fluorite, apatite, orthoclase, quartz, topaz, corundum and diamond.

The number most worth remembering is 7, because that is quartz. Fine quartz grains are part of ordinary dust, sand and grit, so any stone softer than 7 will slowly lose its polish when it is wiped, carried loose in a pocket or knocked against a countertop. That is why almost every Mohs hardness scale chart made for jewelry lovers draws a line at quartz: above it, a stone shrugs off daily dust; below it, the stone needs more thought.
Where Popular Crystals and Gemstones Sit on the Scale
Most people meet the scale through their own crystals rather than through talc and apatite. This second chart places favorite gems and crystals by their usual hardness. Treat the numbers as approximate, since natural stones vary, and rocks made of several minerals (lapis lazuli, for example) can test differently from one spot to the next.
| Stone | Approximate Mohs hardness | Everyday wear |
|---|---|---|
| Diamond | 10 | Excellent scratch resistance |
| Ruby and sapphire | 9 | Excellent for rings |
| Topaz | 8 | Very good, but avoid hard knocks |
| Emerald | 7.5 to 8 | Hard but often brittle; protective settings help |
| Amethyst, citrine, clear and rose quartz | 7 | Good for daily wear |
| Agate, carnelian, onyx, jasper | 6.5 to 7 | Good for daily wear |
| Peridot | 6.5 to 7 | Fine with some care |
| Moonstone, labradorite, sunstone | 6 to 6.5 | Better in pendants and earrings |
| Opal | 5.5 to 6 | Gentle wear only |
| Window glass | about 5.5 | Useful as a test reference |
| Obsidian | 5 to 6 | Chips easily |
| Fluorite | 4 | Display piece rather than daily wear |
| Malachite | 3.5 to 4 | Display or occasional wear |
| Calcite and marble | 3 | Display only |
| Gold | about 2.5 | Softer than the gems it holds |
| Selenite | 2 | Display only; keep dry |
The stones of the Quartz & family group cluster right around 7, which is one reason amethyst and citrine are so popular in rings and bracelets. In crystal traditions, amethyst is often kept for calm and clear thinking and citrine for warmth and optimism, and their hardness means many people can carry them every day without much worry. Agate, carnelian, onyx and jasper sit just below, at 6.5 to 7, and also handle regular wear well.
The Moon & light stones, moonstone, labradorite and sunstone, are feldspars at 6 to 6.5, just under quartz. Moonstone is often linked with intuition and new beginnings in crystal lore, and labradorite with protection during change. Their shimmer lives on the surface, so a scuffed moonstone loses some of its glow. Pendants and earrings, which take fewer knocks than rings, suit them best.
At the top of the scale, sapphire’s hardness of 9, topaz at 8 and diamond’s 10 explain why these stones dominate engagement rings. Emerald’s hardness looks just as reassuring on paper, but its natural inclusions make it more fragile than the number suggests.
At the soft end, opal’s rating of 5.5 to 6 puts it below quartz, and marble at 3 and gold at only 2.5 remind us how many treasured materials are surprisingly soft. Fluorite, malachite and selenite belong with the Earth treasures in our library, and they are best enjoyed as display pieces on a shelf or altar. For every stone mentioned here, the full crystal library has its own article on meaning, lore and care. If you are building a collection that spans the scale, Spirit Magicka is the journal’s own crystal shop.

How to Do a Scratch Test at Home
You do not need a laboratory to use a Mohs hardness scale chart. Mohs designed his scale for field work, and a handful of household objects give you rough reference points. Their hardness varies with exact material, so treat these as guides, not precise values.
- Fingernail: about 2.5
- Copper coin: about 3 (modern coins are often plated alloys, so results vary)
- Steel knife blade or nail: about 5.5
- Plain window glass: about 5.5 (see our note on what glass’s 5.5 means)
- Steel file: about 6.5
- Quartz point: 7
- Choose the right specimen. Test only raw, rough pieces, and only on a hidden edge or base. Never test a polished gem, a carved piece or jewelry, because a scratch is permanent.
- Start soft and work up. Try your fingernail first, then the coin, then the knife. Press firmly and draw a short line, a few millimeters long.
- Rub and look closely. Wipe the spot with your thumb and check it under good light, ideally with a magnifier. A softer tool often leaves a streak of its own powder on a harder stone. If the mark wipes away, it was a streak, not a scratch.
- Reverse the test. Try scratching the glass or the tool with your specimen. If the stone scratches glass, it is harder than about 5.5.
- Narrow the range. Note the softest tool that scratches the specimen and the hardest tool it can scratch. Its hardness lies between them.
- Combine with other clues. Hardness alone rarely identifies a mineral. Color, luster, weight and crystal shape all help narrow the answer.

A worked example
Say you have a raw, pale green specimen from a rock shop with no label. Your fingernail leaves nothing. The copper coin leaves a coppery line, but it wipes off, so that was a streak. The steel knife slides across without biting. Turned around, the specimen cuts a clear groove in a glass square, so it is harder than about 5.5. Finally, you try a quartz point on its base: the quartz leaves no mark, and the specimen can lightly scratch the quartz. That places it at 7 or above. Together with its glassy luster and six-sided shape, a green beryl is a reasonable guess to check against a reference book or an experienced collector.
A quick safety note: glass edges and knives are sharp, so work over a folded towel, keep fingers clear of the stroke, and keep the tools and small specimens out of reach of children and pets.
Hardness vs Toughness: What the Chart Does Not Show
A Mohs hardness scale chart only measures resistance to scratching. Toughness, a stone’s resistance to breaking, chipping and cracking, is a separate quality, and it explains many of the surprises collectors run into.
- Diamond is the hardest natural mineral, yet it has cleavage, meaning planes of weakness along which a sharp blow can split it.
- Topaz at 8 also cleaves cleanly in one direction, so a hard knock on a ring can split it.
- Emerald at 7.5 to 8 usually carries many natural inclusions, which make it brittle. Protective settings and gentle handling matter more than the number implies.
- Fluorite at 4 cleaves very easily, which is why it often breaks into neat octahedral shapes.
- Obsidian, a natural volcanic glass, is around 5 to 6 but breaks with sharp, curved edges and chips at the slightest bump.
- Jade, by contrast, is softer than quartz but famously tough, thanks to its interlocking fibrous structure. That is why it has been carved into tools and heirlooms for thousands of years.
Our guide to gemstone hardness and toughness goes further into how the two qualities work together. The short version: read the hardness number as one part of a stone’s story, not the whole of it.
How Hard Are Metals on the Mohs Scale?
Metals fit awkwardly on the Mohs scale because they tend to bend and smear rather than scratch cleanly. Rough equivalents are still useful: pure gold is about 2.5, silver and copper sit around 2.5 to 3, iron is about 4, and hardened steel ranges roughly from 5.5 to 6.5.
Engineers measure metals in a different way, with indentation tests. The best known is the Rockwell test, developed by Hugh and Stanley Rockwell in Connecticut, who applied for a patent in 1914 so they could quickly check heat-treated steel for ball bearings. The machine first presses an indenter into the metal with a small load to set a zero point, then applies a much larger load, removes it, and measures how deep the indenter went. A deeper dent means a softer metal. Results are reported on lettered scales, such as HRB, which uses a small ball for softer metals like copper alloys and aluminum, and HRC, which uses a diamond cone for hardened steel. An earlier method, the Brinell test, dates to 1900 in Sweden, but it was slower and left a larger mark.
For crystal lovers, the practical lesson is simple: the metal in most jewelry is softer than the stone it holds. Gold and silver prongs wear thin long before a sapphire does, so it is worth having settings checked every so often, especially on rings worn daily.
Using a Mohs Hardness Scale Chart to Wear, Store and Clean Crystals
Wearing
Rings take the most knocks, so stones of 7 and above, from the quartz family upward, are the usual choice for everyday rings. Stones between 5.5 and 7, such as opal, moonstone and labradorite, are happier in pendants, earrings and brooches, or in rings worn on special occasions with a protective bezel setting. Many people like to carry a tumbled stone, meaning one smoothed and polished in a rotating barrel, as a personal touchstone during the day. If you do, pick a harder stone for your pocket, or give a softer one its own small pouch.
Storing
Harder stones scratch softer ones, so a jumbled jewelry box slowly dulls your gentlest pieces. Keep each item in its own soft pouch or compartment, and keep diamonds and sapphires well away from opals, pearls and moonstones. Raw clusters, meaning groups of crystals still growing from a shared base, and geodes, hollow rocks lined with crystals, are best displayed where they will not be knocked or stacked.

Cleaning
Hard, solid stones such as quartz, sapphire and topaz can usually be cleaned with lukewarm water, a drop of mild soap and a soft cloth. Softer and more delicate stones need more care. Selenite is a form of gypsum that slowly dissolves in water, so it should never be soaked or rinsed; dust it with a dry, soft brush instead. Opal, malachite, turquoise and fluorite are also best kept away from soaking, harsh chemicals and abrasive cloths. Avoid salt soaks for soft or porous stones too, since moisture and grit can dull their surfaces.
In crystal traditions, many people also cleanse their stones energetically. Gentle methods such as moonlight, the sound of a singing bowl or a brief pass through incense smoke are popular because they never touch the stone’s surface, which makes them suitable for soft crystals. These are personal practices rather than physical cleaning, and our editorial note explains how the journal approaches traditions like these. When you add new pieces from Spirit Magicka or anywhere else, it is worth checking each stone’s hardness before deciding how to wear and clean it.
Common Mistakes People Make With a Mohs Hardness Scale Chart
- Treating hard as unbreakable. A high number protects against scratches, not blows. Diamond, topaz and emerald can all chip or split.
- Reading the numbers as equal steps. The gap between 9 and 10 is far larger than the gap between 1 and 2. The scale shows order only.
- Testing finished pieces. A scratch test on a polished cabochon, meaning a smooth, domed stone, or a faceted gem leaves a permanent mark. Test only rough, hidden spots on raw specimens.
- Confusing a streak with a scratch. A soft tool can leave powder on a hard stone. Always rub the mark before deciding.
- Assuming every stone in a family matches. Rocks and stone mixtures vary from one sample to the next, and dyed or stabilized stones may behave differently from natural ones.
- Trusting glass and steel as exact references. Glass and blades vary in composition, so they give a range, not a precise number.
- Storing everything together. One loose sapphire in a bag of tumbled stones will scuff all of them over time.
Keep a copy of the Mohs hardness scale chart near your collection and it quickly becomes second nature: a glance tells you which pieces can ride in a pocket, which belong on a shelf, and which need a soft pouch of their own. Pair the numbers with what you know about toughness, and your crystals will keep their shine for years.
Questions
Which mineral is harder, topaz or quartz?
Topaz is harder. It sits at 8 on the Mohs scale and quartz sits at 7, so a topaz edge will scratch quartz but quartz cannot scratch topaz. That also means everyday dust, which carries fine quartz grains, will not dull a topaz. Topaz does have one weakness: it can split cleanly along one direction if it takes a sharp knock, so a hard stone still needs a protective setting.
What is the hardness of sapphire on the Mohs scale?
Sapphire is a 9 on the Mohs scale. It is a variety of corundum, the same mineral as ruby, and corundum is the ninth reference mineral on the scale. Only diamond is harder. That makes sapphire one of the most practical choices for rings and other jewelry worn every day, though a hard blow can still chip an edge or a thin girdle.
What are the hardest gemstones?
Diamond is the hardest at 10, followed by ruby and sapphire at 9, both varieties of corundum. Chrysoberyl, which includes alexandrite, sits around 8.5, and topaz and spinel come in at about 8. Below them come the 7.5 to 8 group, including emerald and other beryls. Remember that the steps are uneven: the gap between diamond and sapphire is far larger than the gap between any two lower numbers.
What are the different hardness levels of metals?
On the Mohs scale, pure gold is about 2.5, silver and copper are around 2.5 to 3, iron is about 4, and hardened steel ranges roughly from 5.5 to 6.5. Because metals bend rather than scratch cleanly, engineers usually measure them with indentation tests such as Rockwell, which records how deep an indenter sinks under a set load and reports results on lettered scales like HRB and HRC.
Is a higher Mohs number always better for jewelry?
Not always. A higher number means better scratch resistance, but hardness is not the same as toughness. Emerald and topaz are hard yet can crack or split from a sharp knock, while jade is softer than quartz but very tough. For a ring worn every day, look for a stone of 7 or higher that is also reasonably tough, and choose a setting that guards its edges.
Can I do a scratch test on my crystals at home?
Yes, with care. Use a fingernail, a copper coin, a steel knife and a piece of glass, and only test a rough, hidden spot on a raw specimen. Never test a polished gem or jewelry, because the scratch is permanent. Rub away any powder afterward to check whether you made a true groove or just left a streak of softer material behind.
Stay curious. Stay connected.
Read our editorial approach


